February 12, 2016, 4:00 pm
![]()
This
St Martin "Evo" BMX Fork
is a modern and high quality manufactured BMX Flatland fork made of 100% heat treated CrMo. The dropouts of the
St Martin "Evo" BMX Fork
have a offest of 15mm offset and are 5thick. The integrated bearing race allows you a uncomplicated installation of an integrated headset.
- Material: 100% CrMo, heat treated
- Steerer Length: 180mm
- Top Bolt: 7075-T6 aluminium, M25
- Dropouts: 5mm thick, 10mm axles
- Offset: 15mm
- Bearing race: Integrated
- Model Year: 2014
129.95 EUR
↧
February 12, 2016, 4:00 pm
![]()
Ares Bikes "Ucchie" Peg - 115mm (Length)
are without a doubt the evolution of peg and Yohei Uchino's signature peg.
The body and end cap of
Ares Bikes "Ucchie" Peg - 115mm (Length)
are threated, an o-ring between cap and body provides a better fitting & shock absorbing. This is the perfect peg for pivotal tricks.
- Material: Aluminium
- Contains: 2 x Peg + 2 x End Caps
- Length: 4.6" (115mm)
- Axle Diameter: 14mm with 10mm (3/8") Adapter
- Extras: removable End Caps for pivotal Tricks
59.95 EUR
↧
↧
February 12, 2016, 4:00 pm
![]()
Ares Bikes "Ucchie" Pegs - 110mm (Length)
are without a doubt the evolution of peg and Yohei Uchino's signature peg.
The body and end cap of
Ares Bikes "Ucchie" Pegs - 110mm (Length)
are threated, an o-ring between cap and body provides a better fitting & shock absorbing. This is the perfect peg for pivotal tricks.
- Material: Aluminium
- Contains: 2 x Peg + 2 x End Caps
- Length: 4.3" (110mm)
- Axle Diameter: 14mm with 10mm (3/8") Adapter
- Extras: removable End Caps for pivotal Tricks
59.95 EUR
↧
February 13, 2016, 4:00 pm
![]()
This
Flybikes "Circulo" Sprocket
is made of high quality CNC machined 6061-T6 aluminum and can be utilized by the supplied adapter ring with either 19mm or 22mm crank spindles. The hole for a regular sprocket bolt recording allows you to fix the
Flybikes "Circulo" Sprocket
on your right but also on the left side crank arm.
- Style: Sprocket Bolt
- Material: 6061-T6 aluminium, CNC machined, with holes for sprocket bolts
- Sizes: 28T, 29T, 30T
- Axle Diameter: Fits for 19mm or 22mm crank spindles, adapter ring included
- Teeth: 1/8"
29.95 EUR
↧
February 13, 2016, 4:00 pm
![]()
Flybikes "Ruben" Pedals - Aluminium
are now available in a light and more affordable Graphite version. The pins of
Flybikes "Ruben" Pedals - Aluminium
are screwable and responsible for good grip.
- Material:
Pedal Body: Aluminium
Axle: 4130 CrMo, heat treated - Thread Size: 9/16", for 3-pc. cranks
- Bearing: Sealed Bearing
- Extras: Platform design, removable pins
89.95 EUR
↧
↧
February 13, 2016, 4:00 pm
![]()
The
Flybikes Brake Lever
is made by Aluminium and has a hinged clamp, so the assembly is very easy.
The
Flybikes Brake Lever
works for BMX bars with 22,2mm diameter.
- Material: 6061-T6 Aluminum, CNC
- Length: Two-finger Lever
- Clamp: 22.2mm
- Extras: Slim and small design
39.95 EUR
↧
February 13, 2016, 4:00 pm
![]()
The
Flybikes "Manual" Brake Lever
is made by Aluminium and has a hinged clamp, so the assembly is very easy.
The
Flybikes "Manual" Brake Lever
works for BMX bars with 22,2mm diameter.
- Material: 6061-T6 Aluminum, CNC
- Length: Two-finger Lever
- Clamp: 22.2mm
- Extras: Slim and small design
22.95 EUR
↧
February 13, 2016, 4:00 pm
![]()
Flybikes "PVC" Barends
are made from plastic.
- Contains: 1 pair
- Material: Plastic
2.95 EUR
↧
February 14, 2016, 4:00 pm
![]()
The
Flybikes "V2" Cable Triangle
is out of
6061-T6 aluminium and for freshing up your brakesystem.
12.95 EUR
↧
↧
February 14, 2016, 4:00 pm
![]()
The
Flybikes "Tractor" Chain
is a strong and light Chain with Hollow CrMo pins which are Chromium heat treated.
The
Flybikes "Tractor" Chain
is a Standard Chain and comes with a built-in Halflink.
- Material: Steel / CrMo Pin
- Style: Standard
- Size: 1/2" x 1/8" (BMX Standard)
- Extras:1.3mm thick plates, 1 x Halflink
25.95 EUR
↧
February 14, 2016, 4:00 pm
![]()
The
Flybikes "Manual" Brake
is made by 6061-T6 Aluminium and comes with adjustable A-hanger system, angled armsa AKO (allen key only) spring plates design and Flybikes "Manual" brake pads with SPS system.
- Material: 6061-T6 Aluminium
- Extras: Adjustable A-hanger system. Angled arms. AKO (allen key only) spring plates design. Manual brake pads
49.95 EUR
↧
February 14, 2016, 4:00 pm
![]()
The
Flybikes Cable Triangle
is out of
6061-T6 aluminium and for freshing up your brakesystem.
6.95 EUR
↧
February 16, 2016, 4:00 pm
![]()
The
Flybikes "Manual Springhanger" Brake
is an innovation, which have been tested and perfected by Flybikes for over two years. This is the infamous "Spring Hanger" braking system which uses the cable hanger as spring for the brake. It means there is no individual springs in the brake arms, which you have to specially adjust. The spring tension can be easily adjusted by bending the spring until the desired voltage is reached. For less friction on the brake, the inner part of the
Flybikes "Manual Springhanger" Brake
is a kevlar-ring.
- Material: 6061-T6 Aluminium
- Extras: innovativ Springhanger System
38.95 EUR
↧
↧
February 16, 2016, 4:00 pm
![]()
The
Flybikes "Devon" Tripod Seat + Tripod Seatpost
consists of the Flybikes "Devon" Tripod seat and a tripod seat post .
- Contains: Tripod seat and Tripod seatpost
- Tripod seat
Typ: Tripod
Material: Plastic
Bezug: Polyester
Polsterung: Mid
Extras: Tripod system, adjustable seat angle, embossed logo - Tripod seatpost
Material: 6061 T6 Aluminium
Diameter: 25.4mm
Extras: Lightweight seatpost, 3 point mounting system
46.95 EUR
↧
February 16, 2016, 4:00 pm
![]()
Flybikes "Devon" Grips
are the signature grip of Devon Smillie and use a micro flange.
Flybikes "Devon" Grips
comes including a pair of pluggable nylon barends and are 160mm long.
- Material:
Grip:Rubber
Barends: Nylon, pluggable - Length: 160mm
- Flange: Nein (micro flange)
- Extras: Devon Smillie signature
8.95 EUR
↧
February 16, 2016, 4:00 pm
![]()
The
Flybikes "Roey" Tripod Seat + Tripod Seatpost
consists of the Flybikes "Roe" Tripod seat and a tripod seat post .
- Contains: Tripod seat and Tripod seatpost
- Tripod seat
Typ: Tripod
Material: Plastic
Bezug: Polyester
Polsterung: Mid
Extras: Tripod system, adjustable seat angle, embossed logo - Tripod seatpost
Material: 6061 T6 Aluminium
Diameter: 25.4mm
Extras: Lightweight seatpost, 3 point mounting system
42.95 EUR
↧
February 16, 2016, 4:00 pm
![]()
Flybikes "Roey" Grips
are the signature grip of Matt Roe and made of soft Kraton rubber with a classic.
Flybikes "Roey" Grips
comes including a pair of pluggable nylon barends and are 150mm long.
- Material:
Grip: Soft Krayton Rubber
Barends: Nylon, pluggable - Length: 150mm
- Flange: Yes
- Extras: Matt Roe signature
8.95 EUR
↧
↧
February 16, 2016, 4:00 pm
![]()
The
Flybikes "Fino" Grip
can easily be cut to length and shape you need.
The
Flybikes "Fino" Grip
is 350mm long and comes including a pair of pluggable nylon barends.
- Material:
Grip: Soft Rubber
Barends: Nylon, pluggable - Length: 350mm
- Flange: Yes
- Extras: Individual lamellar surface design
9.95 EUR
↧
February 17, 2016, 4:00 pm
![]()
The
Flybikes "Tractor XL" Sprocket
has a thickness of 16mm and is compare to "normal" sprockets much stronger!
As well you will not need the spacer between bearing and sprocket so it will look much cleaner.
The
Flybikes "Tractor XL" Sprocket
is made of high quality CNC machined 7075 aluminum and can be utilized by the supplied adapter ring with either 19mm, 22mm or 24mm crank spindles.
- Style: Sprocket Bolt
- Material: 7075 aluminum, CNC machined, with holes for sprocket bolts
- Sizes: 25T, 28T
- Thickness: 16mm
- Axle Diameter: Fits for 19mm, 22mm or 24mm crank spindles, adapter ring included
- Teeth: 1/8"
- Extra: very thick and strong, spacer between bearings and sprockets not neccessary anymore
67.95 EUR
↧
February 17, 2016, 4:00 pm
![]()
This
Flybikes "Tractor" Sprocket
is made of high quality CNC machined 7075 aluminum and can be utilized by the supplied adapter ring with either 19mm or 22mm crank spindles. The hole for a regular sprocket bolt recording allows you to fix the
Flybikes "Tractor" Sprocket
on your right but also on the left side crank arm.
- Style: Sprocket Bolt
- Material: 7075 aluminum, CNC machined, with holes for sprocket bolts
- Sizes: 25T, 28T
- Thickness: 6mm
- Axle Diameter: Fits for 19mm, 22mm or 24mm crank spindles, adapter ring included
- Teeth: 1/8"
46.95 EUR
↧
