The SaltPlus "Trapez" Freecoaster - Oilslick is a Freecoaster-Cassette hub of the latest generation and is based on the function and the typical attachments of a cassette hub. The driver is equipped with special springs, pawls and interchangeable gap discs which allow you the usage as s Freecoaster hub. The great advantage of this new freecoaster technology is that this hub is lighter and your crank does not rotate when you roll backwards like on conventionally used (driver-cluch) coaster technology but offers you a defined and direct depending gap-setting which is equivalent to a cassette hub. The two supplied plastic gap rings of this SaltPlus "Trapez" Freecoaster - Oilslick let you provide a variable adjustment of the gap (Idling phase of the crank until the arrival point). If necessary you can switch these very innovative SaltPlus "Trapez" Freecoaster - Oilslick with the supplied springs and pawls to a typically functioning cassette hub . This is what we call innovation in BMX hubs!
- Material:
Shell: 7075-T6 aluminium, 36H
Axle: Male, CrMo, heat treated, hollow, aluminium cone nuts
Nuts: 17mm CrMo Nuts - Driver: 9T, RHD, 3 bushings
- Bearing: Sealed bearings
- Flange Diameter: Drive side: 54mm / Non-Drive Side: 47mm
- Compatible Hubguards: SaltPlus "Trapez" Freecoaster Hubguard - Non Drive Side and SaltPlus "Trapez" Freecoaster Hubguard - Drive Side
- Extras: Supplied with 2 included "Gap" disks for adjusting the crank gap, and 3 pawls and 3 springs, which are used to convert into a Cassette
199.95 EUR
[incl. 19% VAT excl. shipping]